Producten

Resultaat 1–12 van de 64 resultaten wordt getoond

  • AD-7 Automated Distillation Tester

    Tanaka product

    The AD-7 automatically performs distillation tests of petroleum products as well as narrow boiling range samples.

    Contact
  • AT-710B, Automatic Potentiometric Titrator

    KEM product

    High-performance titrator at a lower price.

    Contact
  • AT-710M, Automatic Potentiometric Titrator

    KEM product

    Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry. Up to 4 titrators , MKV-710B Volumetric, MKC-710B Coulometric or MKH-710/2nd Hybrid Karl Fischer moisture titrators or additional AT-710B potentiometric titrators can be connected, and simultaneous measurement is possible.
    Monitoring temperature during titration ensures safe measurements.

    Contact
  • AT-710S, Automatic Potentiometric Titrator

    KEM product

    Large color TFT-LCD with a touch panel (8.4-inch) enables easy key entry.
    Monitoring temperature during titration ensures safe measurements.

    Contact
  • Automated Pensky-Martens Closed Cup Flash Point Tester

    Tanaka product

    The Tanaka APM-8 is an automated Pensky Martens Closed Cup flash point tester. Which measures the flash point at the lowest temperature at which the application of an ignition source causes the vapors of a sample to ignite.

    Contact
  • Automated Stability Analyser

    Zematra B.V. product

    The Automated Stability Analyzer (ASA) quantifies the maximum flocculation ratio of asphaltenes in oil and the peptizing power of the oil medium according to ASTM D7060.

    Contact
  • Automatic Potentiometric Titrator Model AT 610

    KEM product

    AT-610 is the highest-end model among the KEM Automatic Potentiometric Titrators, featuring an over-sized touch screen LCD to allow for better operations.

    Contact
  • AutoREID

    AD systems product

    The AutoREID apparatus from AD systems is an automated Reid Vapor pressure instrument in full compliance with ASTM D323-B, ASTM D4953, and similar standards.

    Contact
  • CAV® 4.2 Dual-Bath Kinematic Viscometer

    CANNON product

    For Kinematic Viscosity of Transparent and Opaque Liquids ASTM D445/D446, ISO 3104/3105, IP 71. CAV® 4.2 is a fully automated, dual-bath, benchtop viscometer with two 14-position sample handlers for unattended D445 processing. 

    Contact
  • CAV®-2100 Single-Bath Kinematic Viscometer

    CANNON product

    For Kinematic Viscosity of Transparent and Opaque Liquids. ASTM D445/D446, ISO 3104/3105, IP71. CAV®-2100 is a fully automated, single-bath laboratory viscometer with a 13-position sample handler for unattended D445 processing. 

    Contact
  • CCS®-2100 Automated Cold-Cranking Simulator

    CANNON product

    The automated CCS-2100 is a cold-cranking simulator for measuring apparent viscosity of engine oils from –35 °C to –5 °C. Automated sample loading, operation and solvent-free cleaning permit unattended processing of up to 30 samples at one time.

    Contact
  • CCS®-2100LT Automated Cold-Cranking Simulator

    CANNON product

    The automated CCS-2100LT is a cold-cranking simulator for measuring apparent viscosity of engine oils from –40 °C to –5 °C.  Automated sample loading, operation and solvent-free cleaning permit unattended processing of up to 30 samples at one time.

    Contact